本文へスキップ

豊橋技術科学大学機械ダイナミクス研究室は振動工学を専門とする研究室です。

〒441-8580 愛知県豊橋市天伯町雲雀ケ丘1-1

伊勢 智彦Tomohiko ISE

略歴 Biography

2015年4月　豊橋技術科学大学　機械工学系　講師
2008年4月　兵庫県立大学　大学院工学研究科　機械系工学専攻　助教
2008年3月　静岡大学　大学院理工学研究科　博士後期課程修了
　　 　　　 　博士（工学）取得

受賞歴
2015年9月　International Tribology Conference, Tokyo 2015, Poster Award for Young Tribologists

研究テーマ Topics

・回転型加振装置の開発
・各種流体・気体軸受に発生する軸振動低減手法に関する研究
・微小振動を用いた構造物のモニタリング

学術論文 Paper

  • "Hydrostatic Asymmetric Journal Gas Bearings for Largely Unbalanced Rotors of Seismic ACROSS Transmitters", Tomohiko ISE, Takao TORII, Nobuyoshi MORITA, Shinichi TOGO and Makoto OKANO, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol.1 ( 2007 ), No.1, pp.93-101.
  • "Hydrostatic Asymmetric Journal Gas Barings for Seismic ACROSS Transmitters－Improvement of Safety Operation by Supply Gas Pressure Control under the Rotational Frequency Modulation－", Tomohiko ISE, Takao TORII, Nobuyoshi MORITA, Shinichi TOGO and Makoto OKANO, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol.1 ( 2007 ), No.5, pp.681-689.
  • "Design and Workout of ACROSS Transmitters Using Air Bearings, Tomohiko ISE", Takao TORII, Nobuyoshi MORITA, Shinichi TOGO,Takahiro KUNITOMO and Makoto OKANO, Active Geophysical Monitoring, Vol.40 ( Handbook of Geophysical Exploration: Seismic Exploration ), ( 2010 ), pp.193-209.
  • "オリフィス付き空気ばねの非線形特性解析と実験による検証"，浅見敏彦, 横田泰孝, 伊勢智彦, 本田逸郎, 坂本博哉，日本機械学会論文集C編，Vol.77 (2011), No.777, pp.1674-1685.
  • "Split-type Herringbone-grooved Hydrodynamic Journal Gas Bearings for Small Ultra-high-speed Rotary Machines", Tomohiko ISE, Satoshi ONOE, Toshihiko ASAMI, Iwao KAWASHIMA and Tadashi MAEDA, Journal of Power and Energy Systems, Vol.5 ( 2011 ), No.3, pp.406-413.
  • "Hydrostatic Asymmetric Journal Gas Bearings for Large Load Rotors", Tomohiko ISE, Hiroshi MIYATAKE and Toshihiko ASAMI, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol.6 ( 2012 ) , No.1, pp.149-157.
  • "絞りに円管を用いた空気ばねの復元力と減衰力を計算する近似式の提案"，浅見敏彦, 横田泰孝, 伊勢智彦, 本田逸郎, 坂本博哉，日本機械学会論文集C編，Vol.78 (2012), No.794, pp.3413-3424．
  • "Theoretical and Experimental Analysis of the Non-linear Characteristics of an Air Spring with an Orifice", Toshihiko ASAMI, Yasutaka YOKOTA, Tomohiko ISE, Itsuro HONDA and Hiroya SAKAMOTO, Transactions of ASME, Journal of Vibration and Acoustics, Vol.135 ( 2013 ), Issue 1, No.011012.
  • "An Approximate Formula to Calculate the Restoring and Damping Forces of an Air Spring with a Small Pipe", Toshihiko ASAMI, Yasutaka YOKOTA, Tomohiko ISE, Itsuro HONDA and Hiroya SAKAMOTO, Transactions of ASME, Journal of Vibration and Acoustics, Vol.135 ( 2013 ), Issue 5, No.051029.
  • "Development of externally pressurized small-size conical-shaped gas bearings for micro rotary machines", Tomohiko ISE, Naoyuki Arita, Toshihiko Asami, Takenori Nakajima, Iwao Kawashima and Tadashi Maeda, Precision Engineering, Vol.38 (2014), pp.506-511.
  • "Experimental Verification of Externally Pressurized Gas Journal Bearings with Asymmetric Gas Supply (Supply Gas Pressure Control Operation Using a Small Size Test Rig)", Tomohiko ISE, Kazuya IMANISHI, Toshihiko Asami, Takahiro TOKUMIYA, Yaoyuki TAKADA, Fumiyoshi KIMURA and Yoshiyuki YAMAGUCHI, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol.8 (2014), No.3, paper No.JAMDSM0029.
  • "Numerical analysis of hydroinertia gas bearings with inclined supply holes for high-speed rotary machines", Tomohiko ISE, Sayuri Nakano, Toshihiko Asami, Yuki Endo, Itsuro Honda, International Journal of Mechanical Engineering and Applications, Vol.2 (2014), No.4, pp.52-57.
  • "Numerical analysis of influence on gas supply hole number and radial clearance for the characteristics of hydroinertia gas journal bearings", Tomohiko Ise, Sayuri Nakano, Toshihiko Asami, Yuki Endo, Itsuro Honda, Vol.3 (2015), No.1 pp.16-21
  • "Experimental study of small-size air turbo blower supported by externally pressurized conical gas bearings", Tomohiko ISE, Naoyuki Arita, Toshihiko Asami, Iwao Kawashima, Tadashi Maeda and Takenori Nakajima, Mechanism and Machine Theory, Vol.84, pp.57-66.
  • "未知境界条件における弾性はりの線密度同定に関する研究"，松原真己，青野晃大，伊勢智彦，河村庄造，日本機械学会論文集，2016．

国際会議発表論文 Proceedings

  • "Application of Hydrostatic Air Bearings to ACROSS", Tomohiko ISE, Kousuke HIKICHI, Keita SHIRATORI and Shinichi TOGO, 1st International Workshop on Active Monitoring in the Solid Earth Geophysics ( IWAM 04 ), Mizunami, Japan, July 2004, No. S4-P01, pp.208-211, 査読無し．
  • "Hydrostatic Asymmetric Journal Air Bearings for ACROSS Transmitters", Tomohiko ISE, Takao TORII, Nobuyoshi MORITA, Makoto OKANO and Shinichi TOGO, 7th IFToMM International Conference on Rotor Dynamics, Vienna, Austria, September 2006, No.185 ( in CD-ROM ), (referred paper), 査読有り
  • "Hydrostatic Asymmetric Journal Air Bearings for ACROSS Transmitters－Improvement of Safety Operation by Control of Supply Pressure in Rotational Frequency Modulation－", Tomohiko ISE, Takao TORII, Nobuyoshi MORITA, Shinichi TOGO and Makoto OKANO, JSME-KSME Joint International Conference on Manufacturing, Machine Design and Tribology ( ICMDT 2007 ), Sapporo, Japan, July 2007, No.A21 ( in CD-ROM )，査読有り．
  • "The Designing of Large Seismic Transmitters of the Next Generation on the Basis of Comparative Study on Supporting Systems of Largely Unbalanced Rotors for Seismic ACROSS", Tomohiko ISE, Takao TORII, Nobuyoshi MORITA, Takahiro KUNITOMO, Mineo KUMAZAWA, Makoto OKANO, Shinichi TOGO, Workshop on Controlled Source Development for the detection of Seismic and Magmatic Crustal Stress Changes, Beijing, China, October 2007, No.15，査読無し．
  • "Designing, installation and performance of Infrasonic ACROSS transmitter installed at Morimachi just above expected fault plane of Tokai Earthquake", Takahiro KUNITOMO, Mineo KUMAZAWA, Toshiaki MASUDA, Tsutomu KURAHASHI, Tomohiko ISE, Takao TORII, Nobuyuki MORITA, Naoyuki FUJII, Mikio SATOMURA, Yasuhiro YOSHIDA, Sumio YOSHIKAWA, Akio KATSUMATA and Yuzo ISHIKAWA, Workshop on Controlled Source Development for the detection of Seismic and Magmatic Crustal Stress Changes, Beijing, China, October 2007, No.12，査読無し．
  • "Asymmetric Supply Type Hydrostatic Journal Gas Bearings for Seismic ACROSS Transmitters", Tomohiko ISE, Hiroshi MIYATAKE and Toshihiko ASAMI, 4th International Conference on Manufacturing, Machine Design and Tribology, Gamagori, Japan (April 2011), No.97，査読有り．
  • "Theoretical and Experimental Analysis of the Non-linear Characteristics of an Air Spring with an Orifice", Yasutaka YOKOTA, Toshihiko ASAMI, Tomohiko ISE, Itsuro HONDA, Hiroya SAKAMOTO, Proceedings of the ASME 2011 Pressure Vessels and Piping Division Conference PVP2011, (July 17-21, 2011), Baltimore, Maryland, No.57295，査読有り．
  • "Asymmetric Supply Type Hydrostatic Journal Gas Bearings to Decrease the Driving Power of ACROSS Transmitters", Tomohiko ISE, Hiroshi MIYATAKE, Toshihiko ASAMI, Proceedings of the the Second Joint International Conference on Multibody System Dynamics, Stuttgart, Germany, (May 29 - June 1), 2012，査読有り．
  • "An Approximate Formula to Calculate the Restring and Damping Forces of an Air Spring with a Small Tube", Toshihiko ASAMI, Yasutaka YOKOTA, Tomohiko ISE, Itsuro HONDA, Hiroya SAKAMOTO, Proceedings of the ASME 2012 Pressure Vessels and Piping Division Conference PVP2012, Tronto, Canada ( July, 2012 ), No.78481，査読有り．
  • "Characteristics of Externally Pressurized Gas Journal Bearings with Asymmetrically Arranged Inherent Orifices for Large Load Rotors", Tomohiko ISE, Takaaki Itoga and Toshihiko Asami, Proceedings of the 5th International Conference on Manufacturing, Machine Design and Tribology, Busan, Korea ( May, 2013 ), p.84，査読有り．
  • "Characteristics of Externally Pressurized Gas Journal Bearings with Asymmetrically Arranged Inherent Orifices for Large Load Rotors", Takahiro Fukui, Toshihiko Asami and Tomohiko ISE, Proceedings of the ASME 2013 Pressure Vessels and Piping Division Conference PVP2013, Paris, France ( July, 2013 ), No.97850，査読有り．
  • "Validation of the Accuracy of Approximation in a Design Formula for an Air Spring by using Numerical Analysis", Toshihiko Asami, Yasutaka Yokota, Masahito Okura, Tomohiko ISE, Itsuro Honda and Hiroya Sakamoto, Proceedings of the ASME 2013 Pressure Vessels and Piping Division Conference PVP2013, ( July, 2013 ), Paris, France, No.97724，査読有り．
  • "Experimental verification of slot restrictor shape influence on gas bearing characteristics", Tomohiko ISE, Akira INOUE, Toshihiko ASAMI, Fumiyoshi KIMURA and Yoshiyuki YAMAGUCHI, Proceedings of the 5th World Tribology Congress 2013, Torino, Italy, (September, 2013), No.1009，査読有り．
  • "Numerical Analysis of Hydroinertia Gas Bearings with Inclined Supply Holes for High-Speed Rotary Machines", Tomohiko ISE, Sayuri NAKANO, Toshihiko ASAMI, Yuki ENDO, Fumiyoshi KIMURA, Yoshiyuki YAMAGUCHI and Itsuro HONDA, Proceedings of the 5th World Tribology Congress 2013, Torino, Italy, (September, 2013), No.1015，査読有り．
  • "Effect of the rotor speed on the variation of the pressure distribution in the hydroinertia gas bearings," Tomohiko ISE, Sayuri NAKANO, Toshihiko ASAMI, Yuki ENDO, Fumiyoshi KIMURA, Yoshiyuki YAMAGUCHI and Itsuro HONDA, Proceedings of the Fourth European Conference on Lubrication Maintenance and Tribotechnology, Manchester, UK, (June, 2014), Paper No. L144042，査読有り．
  • "Hydrostatic Gas Journal Bearings with Asymmetrically Arranged Inherent Orifices to Support Large-Load Rotors", Tomohiko ISE, Takaaki ITOGA, Toshihiko ASAMI, Kazuya IMANISHI, Fumiyoshi KIMURA, Yoshiyuki YAMAGUCHI, Proceedings of the 15th International Scientific and Technical Conference of Metrology in Production Engineering, Lodz, Poland, (September, 2014), pp.105-110，査読有り．
  • "Externally Pressurized Gas Journal Bearings with Asymmetric Gas Supply (Verification of Availability of Gas Pressure Control Using a Small Size Test Rig)", Tomohiko ISE, Kazuya IMANISHI, Toshihiko ASAMI, Takahiro TOKUMIYA, Tomohiro ISHIKAWA, Yaoyuki TAKADA, Fumiyoshi KIMURA and Yoshiyuki YAMAGUCHI, Proceedings of 9th IFToMM International Conference on Rotor Dynamics, Milan, Itary, (September, 2014), Paper No. Mon‐2 CT18 paper 5，査読有り．
  • "Hydrostatic Gas Journal Bearings with Asymmetrical Arranged Inherent Orifices to Support Large Load Rotors (Verification of Rotor Vibration Characteristics by Rotational Tests)", Tomohiko Ise, Takaaki Itoga and Toshihiko Asami, Proceedings of the 6th International Conference on Manufacturing, Machine Design and Tribology, Okinawa, Japan (April, 2015), pp.444-445，査読有り．
  • "CFD analysis of Hydroinertia gas journal bearings for ultra-high speed rotary machines (Effect of shaft eccentricity on the load capacity)", Tomohiko Ise, Keisuke Teramae, Toshihiko Asami, Proceedings of the 14th World Congress in Mechanism and Machine Science, Taipei, Taiwan, (October 2015), 査読有り．
  • "PSP Visualization of Pressure Distribution of Externally Pressurized Gas Thrust Bearings (Experimental Validation of Variation of Pressure Distribution by Supply Pressure)", Tomohiko Ise, Shuma Kobayashi, Kazuhiro Itoh and Toshihiko Asami, Proceedings of the International Tribology Congress 2015, Tokyo, Japan, (September 2015), No. 16PA-23, 査読有り．
  • "Vibration suppression of the large eccentric rotor by using externally pressurized gas journal bearings with asymmetrically arranged gas supply holes", Tomohiko ISE, Takaaki ITOGA, Kazuya IMANISHI and Toshihiko ASAMI, Proceedings of the 16th Asia Pacific Vibration Conference, Hanoi, Vietnam, (November, 2015), pp.324-328,　査読有り．

バナースペース

豊橋技術科学大学
機械ダイナミクス研究室

〒441-8580
愛知県豊橋市天伯町雲雀ケ丘1-1


E-mail
　kawamura<at>me.tut.ac.jp
　matsubara<at>me.tut.ac.jp
　※<at>を@に変更してください